Boosted Diesels: Inside Turbo Systems and Nitrous Combos

There may be nothing more satisfying than a good turbo system.

Courtesy of Engine Builder

If there’s one thing we know about the diesel crowd, it’s that you folks like to have fun! And what’s more fun that huge turbos and nitrous, am I right? Of course I’m right. But, it’s not fun blowing up your engine because you didn’t utilize the right combination. To get some extra insight into the different levels of turbos and nitrous systems today’s diesel performance guys are running, we spoke with Lavon Miller of Firepunk Diesel.

“Turbo setups really come down to personal preference,” Miller says. “Here at the shop, we have our favorite setups and stuff that we put together that we feel drive nice. Those are ones we’ll sell to guys. I’ve also put setups together that customers have asked for and they just don’t drive all that nice. Most of our recommendations come from personal experience and stuff that we’ve found over the years. However, you can do it 15 different ways.”

There’s a lot to take into consideration when it comes to putting boost to your engine such as driving style, the application of your truck, your elevation, and how much power you ultimately want. 

One of the easiest upgrades to turbocharging is the stock appearing market. That is where you can take the stock turbo off and replace it with another turbo that fits in the exact same location – same down pipe, same oil feed, same oil drain, same intercooler pipe – it just has upgraded turbine wheels and compressor wheels in the stock turbo housing. 

“That’s a big market because it’s something guys can do at home in their garage,” Miller says. “It’s an easy bolt-on configuration. There’s no welding required and there’s pretty good power gains to be had out of those little stock-appearing turbos. They still tow good. They still spool decently fast. We’ve had guys make as much as 900 horsepower with those when you put big fuel systems on.”

The majority of guys have a stock fuel system and want a little bit of a turbo upgrade, so popular options are something like Fleece Performance’s Cheetah turbo, or stock appearing turbos from Tater Built Turbos, Stainless Diesel, or Calibrated Power and its Stealth 64mm. 

You May Also Like

Ignition System Tests You Should (And Shouldn’t) Follow

Do your technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module?

One of the most basic circuits found on every gasoline-powered vehicle is the ignition coil. This transformer takes low-voltage, high-amperage current and changes it into high-voltage current. It has two windings that are not physically connected. What connects them is magnetism. The primary creates an electromagnetic field when system voltage is applied. When the power is turned off, the magnetic field collapses. The energy from the primary is transformed by the secondary windings into high-voltage power that can jump the gap between the electrodes of the spark plug; this is called inductance.

ADAS Technology and Vehicle Alignment

ADAS and autonomous features rely on the alignment being exactly to OEM specifications to perform correctly.

Repairing Wiring Harnesses

We explore the basics of probing and poking.

Top 10 ADAS Calibration Tips

You may have done alignments for years – but are you certain you’re meeting ADAS alignment requirements?

Shift pointers: Tricky Sensor Situations

Diagnostic skill implemented by one transmission technician allowed him to find success with two repairs in one day.

Other Posts
Kohler Energy Introduces Hydrogen-Powered Engine

Carbon-neutral fuel cell system will provide the performance and power density as diesel engines, company says.

Unlocking Peak Engine Performance

Unveiling the truth about ignition systems and engine optimization. This video is sponsored by The Group Training Academy.

Diagnostic Procedures For Stop/Start Systems

Stop/start technology is more than just a switch wired to the brake pedal and starter. Can your techs solve its problems?

Tech Tips: Reading Calipers and Micrometers

Digital tools are great – but what happens if the battery goes dead? Here’s a reminder of how to read a micrometer.