GM Eight Speed Torque Converter Shudder Solution (VIDEO)

The solution to this problem can be lengthy and complicated. This video is sponsored by LubeGard.

Welcome to the GM eight speed torque converter shudder solution by LubeGard. General Motors has issued multiple technical service bulletins on torque converter clutch shudder in the 8-speed, 8L45 and 8L90 transmissions. This problem affects over four million vehicles. That’s 11 different models across three different OE manufacturers between the model years 2015 and 2020. GM’s solution to this problem is lengthy and complicated. It requires a full fluid exchange that uses 20 quarts of an expensive and very specific full synthetic ATF.

Our research and development team went to work by replicating conditions that caused torque converter shudder using our state-of-the-art Falex MultiSpecimen Test Machine. We use this testing platform to create conditions that cause shudder to occur between an automatic transmission friction plate and a steel plate, replicating the movement in a torque converter. When the friction and steel plate specimens were lubricated with the GM recommended ATF alone, shudder and slippage still occurred.

We then ran the exact same test under the same conditions with the addition of Lube Gard Platinum ATF Protectant at a treat rate of two ounces per quart. The shudder was eliminated. The testing also shows that platinum provided control and stabilization of the fluid friction at a constant level throughout the test.

You can avoid the expensive replacement of the OEM ATF by simply adding two 10 ounce bottles or 20 ounces of Lube Gard Platinum ATF Protectant. If you do decide to go with the OEM fluid flush, you can add the platinum and prevent the torque converter shudder from returning. By adding platinum you’ll also be protecting the transmission from friction, wear, heat and additive depletion.

For more information on LubeGard products and where to purchase them, visit our website at www.lubegard.com, or send us an email at [email protected]. Thanks for watching.

This video is sponsored by LubeGard

You May Also Like

ADAS Calibrations: Limited Space Is Okay

ADAS work should be in play for almost everyone, regardless of space.

It’s a popular misconception about calibrations: Shops need a large amount of space to do ADAS work. But it’s simply not true.

A large majority of forward-facing calibrations – the most common of all ADAS calibrations – can be done in space nearly every shop has.

What Constitutes A Complete Brake Job?

Complete, safe brake jobs are key. This video is part of the Group Training Academy.

Decoding Brake Pull Issues

Solve brake pulls! This video is part of the Group Training Academy.

Understanding and Preventing Brake Noise

Silence noise with a complete brake job. This video is part of the Group Training Academy.

Growing Service Opportunities: Vacuum Pumps and Parking Brake Actuators

As the car parc evolves, so do service opportunities. This video is sponsored by Standard.

Other Posts
Gasoline Direct Injection Technology

GDI has been an key part of vehicles since the early 2000s. This video is sponsored by Standard.

Software Focus: Optimal Diagnostic Results

Improve scan tool operation and diagnostics. This video is sponsored by Bosch.

Clutch System Components

Clutch problems can occur at almost any mileage for a variety of reasons. This video is sponsored by The Group Training Academy.

Timing System Components

Boost timing system efficiency. This video is sponsored by The Group Training Academy.